Designed to be the easiest, most cost-effective, and the most flexible way for you to complete your NAR or Tripoli Level 1 flight – you can even do your Level 2 flight on it just as easily. Includes an integral electronics/payload section that can be used to house our NEW CAMFlex camera/altimeter mount – with or without the camera. Using this simple laser-cut plywood mount allows the use of an altimeter to control your parachute for a PERFECT deployment every time! Why “guess” with motor ejection? It’s not as difficult as you may think – and our full- color printed instructions explain every step! You’ll get valuable experience flying with electronics, which will give you an advantage when you go for your Level 2 flight!
Featuring a 54mm Motor Mount for maximum flexibility. It’s built outside the airframe so you can pay extra attention to strengthening – then, the entire motor tube/fin assembly is inserted into the airframe.  Easy to use 29 and 38mm Motor Adapters are available, as well. 3D-Printed 2-piece Plastic Nose Cone is easy to assemble and finish – and it’s STRONG! Parachutes are not included, in case you have a favorite brand – and Top Flight Recovery parachutes recommended for this model are available directly from SBR!
It’s the most thought-out rocket design ever – designed to get you successfully certified! Low and Slow? We don’t think so!
A modular Dual Deploy Module (DDM) is available separately, to easily convert your Fusion Flex to Drogue-to-Main recovery using electronics – it also adds 10″ to the overall length of the model – which adds stability!  Dual-deploy or single deploy – the choice is yours! Add our convenient Dual-Deploy Module (DDM) to allow your Fusion Flex to fly drogue to main flights easily, and without the addition of complex, heavy all-thread-laden electronics bays! Our simple solution makes it easy! Can be added while building, or you can add it later, after you’ve already built your Fusion Flex! Order your DDM HERE.
CamFlex Compatible DDM Dual Deploy Module HERE
CAMFlex Camera/Altimeter Mount available HERE
Parachutes Available HERE (15″ drogue 45-50″ main) Heat Shields & Shock Cord Protectors HERE
Motor Adapters HERE Epoxy Available HERE RRC2 and RRC3 Altimeters HERE
59.5″ Length (69.5″ w/DDM)
4″ Diameter
54mm Motor Mount
3-4 lb. weight
1/4″ Laser-Cut Plywood Fins, 2-pc. 3D-Printed Nose Cone, 16′ and 3′ 1/2″ Tubular Nylon Shock Cords,
Laser-slotted SBR 4″ Airframe Tube, Couplers, Laser-cut plywood Bulkhead Plates and Interlocking Centering Rings.
Full-Color digitally-printed vinyl decals,
Designed by Scott Binder
